Tuesday, June 30, 2015
To line up the birthday greeting on the acrylic block, I first lined it up (smooth side up) on my grid paper. Then I pressed the block, which has grid lines etched on one side, onto the stamp so that I could keep it straight along the diamond strip. To finish off the card, I mounted the panel with dimensionals on a light green card (looks white here) and added the sequins.
I've added a few new tools in the Tower lately that have really been a help. My faves are the MISTI, the magnetic platform for the Big Shot, and the mint-colored B plates which I no longer have to hunt for on my table.
To make this card, I first stamped the verse and ran it through the Big Shot with the rectangular die. The dsp strips were then cut at 1 1/2" wide to completely fit underneath the curved opening. (To find the width you need, measure from the top of the curve to the lowest point. Otherwise, as I learned from experience, you'll have a gap.)
After cutting the SU Pear Pizazz cs 4 1/4" x 4 3/4", I die cut the curve and attached all the pieces to the card front as shown. The leaf was cut with a die I bought at Hobby Lobby last year which has an outline die and another insert that embosses the veins in the leaf at the same time. (Sorry, I don't know the company name.) I sponged the leaf with Distress ink and attached it to the card with a SU dimensional. The pearls were added in one strip and curved to match the opening.
Although time consuming with so many steps, this was an easy card to make.
Saturday, June 27, 2015
All 4 of our grandchildren excelled in school this year, and we are proud of them all. (Insert grandma brag here...) Kristen will start High School next year. Elliot also "graduated" from Kindergarten, Owen goes up to 5th grade, and Freddy will be a Senior looking at colleges. WOW! Where did all those years go?
We are truly thankful for all the Lord has been doing in our family, Christian schools and churches. It is a wonderful blessing to watch your children and grandchildren grow in the Lord, especially now that they all live close by.
The triangles on the bottom and the sponging along the edges are to cover smudges that just appeared out of nowhere...true confession... I also added a strip of the yellow dsp to highlight more of the yellow.
Matching envelopes are a fun way to complete a theme. For this one, I pierced a butterfly image by using a vellum butterfly as a template, piercing through it. Easy!
Wednesday, June 24, 2015
The dsp is from a pad of SU 4 1/2 x 6 1/2" paper stack which I also found at the yard sale mentioned below. The ticket corners were created with a circle punch to add a little interest without embellishment. I'm amazed at how the dsp perfectly matched the paper from the Paper Pumpkin kit!
The first thing I noticed was that it was beautifully wrapped in tissue paper inside. There was also a surprise gift of a paper piercing set which I plan to give to a friend since I already have one.
Next was a packet of pre-cut window sheets and frames for the shakers, the coordinating embellishments, the card bases for 9 cards and the matching envelopes. They even included narrow strips of dimensional foam adhesive as well as 6 stamps and an ink pad square. Actually, I was quite impressed with all that it contained.
The step-by-step instructions were easy to follow with photos of each step. The card on the lower right was the first one I did as I followed the instructions. I added the butterfly embellishment from my own supplies. The next card was the top right on which I added a butterfly from a pad of SU printed vellum and a scrap piece of glitter rick-rack.
The card on the left was super easy to do after completing the previous two. I simply glued the dsp to the front of the card, added the shaker ingredients and mounted the shaker window over it. The butterfly was punched from the same color glitter paper as the "hello" and mounted with a glue dot.
For more Paper Pumpkin ideas, check them out on YouTube!
Monday, June 22, 2015
After stamping and coloring the image in "From the Herd" (SU!), I cut an X with my craft knife and ripped the edges as shown. I added the sentiments inside and out from the same set.
For a final touch, I coated the eyes with Glossy Accents. Hopefully, this will cheer someone who needs a pick-me-up.
Sunday, June 21, 2015
After stamping this label frame, I colored the bird and brushed on some Wink of Stella. Next, I took the SU piercing template and used my paper piercer to outline the label. Then I cut a rectangle around it and sponged the edges with blue ink, stamped the greeting, and mounted the image to the card with dimensionals.
For embellishment, I added a few shiny sequins. I didn't time it, but I'm sure it was under 10 minutes to make this card. Enjoy!
Saturday, June 20, 2015
Tuesday, June 16, 2015
After clear embossing one of the flower images from the SU Mixed Bunch set, I sponged in a circular motion over each of them. After adding the bakers twine, tiny tag and coordinating sequins, I mounted the panel to the white card front with dimensionals.
Another easy card!
Monday, June 15, 2015
To make this a summer card, I simple took two shades of green Distress markers and pounced them around the trees and fence posts. Then I used my water brush to fill in the color.
For a winter scene, I left the trees bare and added glitter along the top of the hill and around the fence posts. For Fall, I would use autumn colors for the leaves; and for Spring, more yellow with less blending.
This set is "Winter Fenceline" from Serendipity Stamps.
Friday, June 12, 2015
After adding 3 pearls on the right side of the arc, I ran the card through the Big Shot. When smooshed under pressure like that, they look like pearly flowers. (Ask me how I knew that...)
I'm discovering lots of ways to make better use of my dsp collection. Look at the patterns in your stash and see what you come up with for inspiration--you'd be surprised at what you can use!
Wednesday, June 10, 2015
This photo was on the disk, and I barely remember making these cards for our pastor. Enjoy!